Home > Shop > ST11 2.5kN Pneumatic Grip (pair)

ST11 2.5kN Pneumatic Grip (pair)

The tensile force that can be applied to the sample will depend on the coefficient of friction of the sample. Samples up to 10mm thick and 40mm wide can be accommodated between the jaw faces.

1mm pitch pyramid faces are fitted as standard, rubber and plain faces are available. The pyramid faces are hardened to 60HRC. All standard faces are 40mm × 30mm.

A 3 position foot valve is supplied as standard, a hand control is available as an option.

All pipe work, valves etc. are included. We do not supply the connection to the mains supply or mains filtering or regulation. It is recommended that non-lubricated filtered air is used. The 2.5kN clamping force is quoted at 7 bar, the maximum air pressure that can be used is 8 bar. The connection from the mains to the grip controller is by 4mm o/d semi-rigid nylon tube into a push fit connector. We supply 3 metres of this tube with each grip assembly.

Full Description

These grips are supplied with a set of jaws and a three position foot switch as detailed in the specification. If you do not require the standard jaws, foot switch or both these items please select the appropriate build from the drop down price menu and then add extra items from those shown at the bottom of this page.

Maximum Load

Clamping Force 2.5kN.

Sample Size

40mm Wide, 10mm Thick.

Sample Type

Flat samples. Rubber, plastic, films, paper etc.


3kg per pair.


Plain jaw face
Part Number S11008

Rubber jaw face
Part Number S11010

Pyramid faces 1mm pitch
Part Number S11007

Hand control box
Part Number S11009