ST4 10kN Wedge Grip (pair)
A general purpose wedge grip for flat and round samples. The jaw faces are sprung loaded onto the sample and released using the lever. The lever is designed to be positioned at the rear of the grip to give minimal obstruction when loading a sample, it may be used the other way round if desired. Jaw faces are interchangeable by releasing the retainers on one side of the grip and sliding out the faces.
The grips are supplied with 0-10mm flat faces. Flat faces for 10-20mm and round faces for 3-6mm and 6-12mm diameter are available. A particular feature of the round jaws is that both ranges are machined on the same facing block, therefore you get both sizes when ordering the round face option.
Flat faces are cut with a 1mm pitch pyramid pattern.
Full Description
!important
These grips are supplied with a set of jaws as detailed in the specification. If you do not require the standard jaws please select the “without jaws” option from the drop down price menu and then add to your cart the jaws you require from those shown at the bottom of this page
Maximum Load
10kN.
Sample Size
Flat samples 0-10mm and 10-20mm, round samples 3-6mm diameter and 6-12mm diameter.
Sample Type
Metals, hard plastics, rubbers and other polymers. Flat or round samples.
Weight
5.7kg per pair.
Accessories
0-10mm flat samples
Part Number S03004
4 required
10-20mm flat samples
Part Number S03009
4 required
3-6/6-12mm round samples
Part Number S03018
1 set
