ST9 500N Vice Grip Double Acting (pair)
This grip is similar to ST8 but has the advantage that both sides are adjustable, allowing the sample to be centred. This arrangement gives the best results, avoiding bending forces in the sample and on the loadcell. The gripping force is applied using a large diameter threaded rod. This rod is cross drilled to allow the use of a bar to increase the gripping force.
An alternative pyramid cut face is available, this face is hardened to 60HRC. Unlike ST8, the jaw faces on this grip can be changed by the user.
Stainless steel or plated finishes are used for excellent corrosion resistance.
Full Description
!important
These grips are supplied with a set of jaws as detailed in the specification. If you do not require the standard jaws please select the “without jaws” option from the drop down price menu and then add to your cart the jaws you require from those shown at the bottom of this page
Maximum Load
500N. This is the rating of the grip, the actual load that can be applied to the sample will depend on the coefficient of friction.
Sample Size
24mm wide, 10mm thick.
Sample Type
Films, paper, rubbers and plastics, laminates. Samples must be flat.
Weight
1.0kg per pair.
Accessories
Pyramid cut face 1mm pitch
Part Number S08006
4 required
