Home > Shop > ST82 2.5kN Pneumatic Grip (pair)

ST82 2.5kN Pneumatic Grip (pair)

A general purpose single acting pneumatic grip with manual adjustment of the opposing face. The closing force between the jaws is 2.5 kN with a pressure of 7 Bar. The tensile force that can be applied will depend on the co-efficient of friction between the jaws and the sample. Samples up to 13mm thick can be accommodated between the jaws.

1mm pitch pyramid faces are supplied as standard, rubber and plain faces can be supplied on request. All standard faces are 40mm wide x 30mm high.

A 3 position footswitch is supplied as standard, a hand controller is available as an option

All pipework, valves etc are included, we do not supply the the connection to the mains supply or mains filtering or regulation.

It is recommended that non-lubricated filtered air is used. The 2.5kN clamping force is quoted at 7 bar, the maximum air pressure that can be used is 8 bar. The connection from the mains to the grip controller is by 4mm o/d semi-rigid nylon tube into a push fit connector. We supply 3 metres of this tube with each grip assembly.

Full Description

These grips are supplied with a set of jaws and a three position foot switch as detailed in the specification. If you do not require the standard jaws, foot switch or both these items please select the appropriate build from the drop down price menu and then add extra items from those shown at the bottom of this page.

Maximum Load


Clamping Force 2.5kN


Sample Size 40mm wide x 13mm thick. Wider if using wide.
Sample Type Flat samples. Metals, wood, plastic, etc


3.0kg per pair.


Accessories Different jaws widths and surfaces by request.