Home > Shop > ST85 1.0kN Single Acting Pneumatic Yarn Grip (pair)

ST85 1.0kN Single Acting Pneumatic Yarn Grip (pair)

Designed for rapid loading and consistent testing of ropes yarns and cords, it can also be used for fine wires that are flexible enough to wrap around the elliptical body. A pressure regulator device is available to allow the clamping pressure of the jaw on the tail of the sample to be adjusted to suit the sample.

All pipework, valves etc are included, we do not supply the the connection to the mains supply or mains filtering or regulation.

It is recommended that non-lubricated filtered air is used. The 1.0kN clamping force is quoted at 7 bar, the maximum air pressure that can be used is 8 bar. The connection from the mains to the grip controller is by 4mm o/d semi-rigid nylon tube into a push fit connector. We supply 3 metres of this tube with each grip assembly.

Full Description

These grips are supplied with a set of jaws and a three position foot switch as detailed in the specification. If you do not require the standard jaws, foot switch or both these items please select the appropriate build from the drop down price menu and then add extra items from those shown at the bottom of this page.

Maximum Load
Clamping Force 1.0kN

Sample Size
Up to 6mm diameter

Sample Type
Ropes, Yarns, Cords, etc and some wires

1.5kg per pair.

S85010 Grip pressure control assembly
S10009 Hand control assembly