Home > Shop > 01/3406 Thin Film Puncture Jig 500N M6 Male

01/3406 Thin Film Puncture Jig 500N M6 Male

The Thin Film Puncture Jig can be used for sheet gelatin, edible film, drug release film, nori, dried leaves and oral mouth
freshener strips to test. Bursting strength, stress relaxation and stretch recovery
It consists of two sets of base table inserts, fitted to the base table
1. Aluminium insert with a 6mm aperture, a matching Perspex insert with 6mm aperture, two locking screws and a
5mm diameter ball probe
2. Aluminium insert with a 11mm aperture, a matching Perspex insert with 11mm aperture, two locking screws and a
10mm diameter ball probe
Jig selection depends upon sample thickness and maximum force, a larger aperture for the thicker samples. Always use
the same combination for the sample samples and do not mix and match fixtures for the same sample
Fit the upper probe directly to the loadcell and the lower fixture to the base table, jog the machine down and align the ball
probe so it fits in to the lower plate aperture with no friction.
To test, separate the upper plate from the lower plate, place the sample on the lower plate and secure with the upper
plate.
Move the probe to within 5mm of the sample and start the test
Test is a compress to limit with break

Full Description